500W Power Amplifier (PA-5500)
Features
- 500W/ 70V or 100V or 4 Ohm power amplifier
- Thermal protection by muting input signal (typically 85 deg at heat sink)
- Momentary short circuit protection
- Temperature dependent dual speed cooling fan
- Manual reset circuit breaker for AC mains and DC input
- Balanced input signal with gain control and selectable grounding option
- AC and DC operation for uninterrupted operation during power failure
Description
Kodio PA-5500 of power amplifier had been the workhorse of many installations and are available in power rating of 500W 70/100V line. Various features had been added hroughout the years since its inception and these had enhanced their performance and reliability.
Kodio PA-5500 of power amplifier had been the workhorse of many installations and are available in power rating of 500W 70/100V line. Various features had been added hroughout the years since its inception and these had enhanced their performance and reliability.
Technical Specifications
| Power requirement | 230 / 240V ac (24V DC backup) |
| 24V DC requirement | 29A |
| Power consumption (load) ac | 4.5A |
| Power consumption (s/by) | 0.4A |
| Input sensitivity | 1V / 10K Ohm |
| Input gain control | -15dB~0dB |
| Rated output (rms) | 500W |
| Output voltage (4 Ohm) | 44V rms |
| Output imp (70V line) | 10 minimum |
| (100V line) | 20 maximum |
| Frequency response | 180HZ~17KHz (with low cut) |
| S/N ratio | > 60dB @1KHz |
| Protections | Thermal, momentary output short circuit, AC |
| and DC circuit breaker, Input signal clip | |
| Indicators | AC mains, Clip, Protect, Input level |
| Cooling system | Dual speed fan with heat sensing |
| Dimensions (WxHxD) | 482 x 133 x 300 mm |
|
Weight |
24 kg |
